Metal Reviews https://www.metalreviews.com/phpBB/ |
|
My etching piece https://www.metalreviews.com/phpBB/viewtopic.php?f=11&t=4565 |
Page 1 of 1 |
Author: | Anonymous [ Wed Jan 04, 2006 12:55 am ] |
Post subject: | My etching piece |
Did this for school, it was my first big assignment of the year. Enjoy, and comment as you please. ![]() ![]() ![]() |
Author: | Anonymous [ Wed Jan 04, 2006 1:00 am ] |
Post subject: | |
AMAZING!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!1111 I like it, good job dude. |
Author: | Ness [ Wed Jan 04, 2006 1:01 am ] |
Post subject: | |
That's good stuff, how long did it take you? |
Author: | Azrael [ Wed Jan 04, 2006 1:13 am ] |
Post subject: | |
that's some awesome stuff. if you have more feel free to post ![]() |
Author: | Ness [ Wed Jan 04, 2006 1:14 am ] |
Post subject: | |
Azrael wrote: that's some awesome stuff. if you have more feel free to post
![]() http://iaurnaurion.deviantart.com/gallery/ this website is in his profile. Great stuff. |
Author: | Carnifex Umbris [ Wed Jan 04, 2006 1:15 am ] |
Post subject: | |
That's really good. Printmaking is a lot of fun. |
Author: | MetalStorm [ Wed Jan 04, 2006 1:21 am ] |
Post subject: | |
That's some good artwork. |
Author: | Eyesore [ Wed Jan 04, 2006 1:27 am ] |
Post subject: | |
That's good, dude. It reminds me of storyboard work. |
Author: | Anonymous [ Wed Jan 04, 2006 1:32 am ] |
Post subject: | |
I think it took me about an hour and a half to prepare the zinc plates, two hours to draw into the varnish on the plates, a further two hours tending to the plates during the etching process (they only lay in the tub for around nine minutes, but different approaches were used for each plate), and finally fifteen minutes for preparing the paper and the press, and inking it correctly and finally printing it. |
Author: | Anonymous [ Wed Jan 04, 2006 1:34 am ] |
Post subject: | |
Eyesore wrote: That's good, dude. It reminds me of storyboard work.
It's a very small story actually; a group of soldiers heading into ruins held by some well prepared gits, and the outcome is seen in the last pic. I like doing series. |
Author: | Legacy Of The Night [ Wed Jan 04, 2006 1:35 am ] |
Post subject: | |
Fuck'n awesome! ![]() |
Author: | Anonymous [ Wed Jan 04, 2006 2:43 am ] |
Post subject: | |
metalNESS wrote: Azrael wrote: that's some awesome stuff. if you have more feel free to post ![]() http://iaurnaurion.deviantart.com/gallery/ this website is in his profile. Great stuff. That's my old page, it doesn't get updated anymore. |
Author: | Misha [ Wed Jan 04, 2006 11:20 am ] |
Post subject: | |
The first and especially the last are extremely awesome! Great mood in these! |
Author: | Misha [ Wed Jan 04, 2006 11:21 am ] |
Post subject: | |
BTW, it seems that you used some other techniques than just dry needle, or am I incorrect? Can you tell more? |
Author: | Anonymous [ Wed Jan 04, 2006 2:20 pm ] |
Post subject: | |
Gast1 wrote: BTW, it seems that you used some other techniques than just dry needle, or am I incorrect? Can you tell more?
Didn't use dry needle at all, actually. It's a pretty standard line etching: the plate is coated with a layer of varnish, into which is drawn with a sharp object to uncover the surface of the plate again. Once drawn, the plate is dunked into a bowl with diluted acid, where the uncovered areas of the plate are slightly hollowed out, whereas the areas covered by the varnish are unaffected. The actual outcome of the etch is mostly determined by this etching process; for instance in the first one, I let the acid work for around four minutes, then covered everything except the soldiers with another layer of varnish, then lay it back for another five minutes - this is why the soldiers are much darker than the environment, as their lines have been hollowed out a bit more. |
Author: | Goat [ Wed Jan 04, 2006 3:13 pm ] |
Post subject: | |
Like it. You artsy types should post your stuff here more often. |
Author: | Skartasis [ Wed Jan 04, 2006 4:23 pm ] |
Post subject: | |
Very nice. I'm not familiar with this technique, but none the less, great work. Really like the use of shadows on the second one. Everytime I see somethink like this, I always go like "bohoo" for the lack of my own skill... |
Author: | Goat [ Wed Jan 04, 2006 4:25 pm ] |
Post subject: | |
Skartasis wrote: [si]Everytime I see somethink like this, I always go like "bohoo" for the lack of my own skill...[/size]
Hey, at least you can draw. I'm useless at art. |
Author: | Fingon [ Wed Jan 04, 2006 4:36 pm ] |
Post subject: | |
mooi werk! voortgaan zo ![]() |
Author: | Misha [ Wed Jan 04, 2006 4:46 pm ] |
Post subject: | |
Slayer Of Kings wrote: Gast1 wrote: BTW, it seems that you used some other techniques than just dry needle, or am I incorrect? Can you tell more? Didn't use dry needle at all, actually. It's a pretty standard line etching: the plate is coated with a layer of varnish, into which is drawn with a sharp object to uncover the surface of the plate again. Once drawn, the plate is dunked into a bowl with diluted acid, where the uncovered areas of the plate are slightly hollowed out, whereas the areas covered by the varnish are unaffected. The actual outcome of the etch is mostly determined by this etching process; for instance in the first one, I let the acid work for around four minutes, then covered everything except the soldiers with another layer of varnish, then lay it back for another five minutes - this is why the soldiers are much darker than the environment, as their lines have been hollowed out a bit more. Yes, I know how it's done, but there are several techniques in etching, droge naald, suikerwater, harskorrels etc. I thought I recognized the first. |
Page 1 of 1 | All times are UTC + 1 hour |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |